Stiebel Eltron DHB-E 13 LCD AU Electric Instantaneous Water Heater 60C 14.5kW 3 Phase
Stiebel Eltron DHB-E 27 LCD AU Electric Instantaneous Water Heater 60C 28.0kW 3 Phase
Stiebel Eltron DHB-E 18 LCD AU Electric Instantaneous Water Heater 60C 19.4kW 3 Phase
Accurate temperature settings are no longer a problem, thanks to the LCD controller. This allows direct accurate continuous flow temperature delivery selection between 20 and 60 °C. With 3i technology for high efficiency and output, the DHB-E LCD provides a reliable and constant supply of hot water.
Ideal Installation Areas. Bathrooms, Apartments, Commercial bathrooms or sinks, Restaurants or Cafes
Accurate temperature delivery selection between 20 and 60 °C
Suitable for hard and soft water areas
Bare wire element is suitable for hard and soft water areas
Rated output (415V) 19.4kW. Rated current (415V) 27Amp. Phases 3/PE
Dimensions H 466mm x W 225mm x D 116mm
Made in Germany.
WaterMark Lic No. WMKA00301, AS3498
CALCULATING OUTPUT WATER TEMPERATURE:
Add below temperature rise value to Seasonal Average incoming cold-water temperature to calculate output at a desired flow rate. Typical Basin or Sink Tap Flow Rate is 6 Lpm and a Shower 9 Lpm
DHBE18 LCD AU TEMPERATURE RISE (415 V) Litres Per Minute
6 L/min +46°C. 8 L/min +34°C. 10 L/min +27°C. 12 L/min +23°C. 14 L/min +19°C
SEASONAL AVERAGE INCOMING COLD-WATER TEMPERATURES:
Melbourne: 15°C. Sydney/Brisbane/Perth/Adelaide: 18°C. Canberra/Hobart: 14°C. Townsville/Darwin: 25°C
Refer Download for Further Information & Water Temperature Output Calculations and Flow rates
5 Year full parts and labour domestic warranty*
*Conditions apply - refer Stiebel Eltron warranty policy for full details.
Must be installed by a qualified licensed person in accordance with manufacturer’s instructions and all relevant plumbing and electrical regulations.