PEX EPS CRIMP
EPS PEX Pipe & Fittings
Shop the complete EPS PEX crimp pipe & fittings range online at PlumbingSales.com.au. We stock Elson EPS PE-Xb crimp pipe in 16mm to 32mm for cold water, hot water, rainwater, recycled water, and gas applications, alongside a comprehensive fittings range including couplings, elbows, tees, adaptors, breeches, and conversion fittings. Free shipping on orders over $300, with same or next day dispatch and click & collect from our Melbourne warehouse.
EPS PEX Crimp Pipe and Fittings for Trade Installations
EPS PEX crimp is a proven, trade-standard piping system used across residential and commercial plumbing installations in Australia. The system uses PE-Xb crosslinked polyethylene pipe — available in a range of colour-coded variants for different applications — joined with brass crimp fittings and secured using a dedicated crimping tool.
At PlumbingSales.com.au, we stock the full Elson EPS PEX crimp range: pipe in 16mm through to 32mm, a comprehensive fittings suite covering couplings, elbows, tees, breeches, and adaptors, and the Novopress ACO153 and Elson ALBA crimping tools. Browse the complete range online and order 24/7 with fast Australia-wide delivery.
EPS PEX Crimp Pipe Range
The EPS PE-Xb crimp pipe range is colour-coded by application, making it straightforward to identify and comply with AS/NZS piping system requirements on site.
| Colour | Application | Available Sizes |
|---|---|---|
| Black | Cold water | 16mm, 20mm, 25mm, 32mm |
| Red | Hot water | 16mm, 20mm |
| Green | Rainwater | 16mm, 20mm |
| Lilac | Recycled water | 16mm, 20mm |
| — | Gas (Multi-layer PEX/AL) | 16mm, 20mm, 25mm, 32mm |
Pipe is available in 50m and 100m coils for black cold water pipe (16mm and 20mm), with 25m coils available for larger diameters and gas pipe. In-conduit options are available for 16mm and 20mm cold water pipe, suited to installations requiring additional protection or sleeve routing.
EPS Crimp Fittings Range
The EPS crimp fittings range covers all standard connection types for both water and gas applications. All fittings are rated for use across the EPS crimp system.
Couplings Straight couplings and reducing couplings in 16mm, 20mm, 25mm, and 32mm for joining pipe runs and transitioning between sizes.
Elbows Standard elbows in 16mm–32mm, male and female BSP elbows, lugged elbows (19BP) in multiple arm lengths for wall termination, female BSP lugged elbows (15BP), and female BSP elbows (No63) for fixture connections.
Tees Equal tees in 16mm–32mm, plus a wide range of reducing centre tees for branching off mains runs — including 20x20x16mm, 25x25x20mm, 25x25x16mm, 32x32x25mm, and further centre-reduced configurations.
Male and Female BSP Connectors Male BSP connectors in 16mm and 20mm pipe sizes with 15mm and 20mm BSP threads, and 25mm and 32mm pipe sizes with 20mm and 25mm BSP threads. Female BSP connectors across the same size range for connecting to threaded fixtures and valves.
Adaptors and Transition Fittings
- Copper press water adaptors (16mm–32mm) for transitioning to copper press systems
- Copper press gas adaptors (16mm–32mm) for gas system transitions
- Female adaptor cone seal (No62) and female adaptor washer seal (No62) for fixture connections
- Copper compression union flared fittings for copper-to-PEX connections
PEX Conversion Adaptors and Tees For retrofitting or extending existing PEX installations, the range includes conversion adaptors and tees for:
- Polybutylene pipe (18mm to 16mm EPS, 22mm to 20mm EPS)
- SDR7.4 PEX pipe (16mm and 20mm) — both crimp and push-on versions
- SDR9 PEX pipe (16mm, 20mm, 25mm) — both crimp and push-on versions
- SDR11 PEX pipe (20mm) — push-on version
- Bushpex to Elson EPS (16mm, 20mm, 25mm) — push-on versions
End Caps and Breeches End caps in 16mm, 20mm, and 25mm for capping off pipe runs. Bath/laundry breeches (200mm and 300mm right angle) and shower breeches (150mm and 200mm, in right angle and top entry configurations) for in-wall rough-in connections.
Gas Applications
For gas installations, the EPS range includes multi-layer PEX/AL pipe — a composite pipe with an aluminium core bonded between two PEX layers — available in 16mm through to 32mm. The same crimp fittings suite (couplings, elbows, tees, BSP connectors, and adaptors) is rated for both water and gas service, simplifying stocking and ordering across mixed installation types.
Gas pipe and gas-rated fittings must be installed by a licensed gas fitter in accordance with Australian Standards. Always confirm the product's gas rating on the individual product page before use in gas applications.
Crimping Tools
The EPS PEX crimp system requires a dedicated crimping tool. We stock the Elson ALBA manual crimping tools (16mm, 20mm, and 25mm) and the Novopress ACO153 12V battery-powered press tool with EPS-specific jaws in 16mm, 20mm, 25mm, and 32mm. Crimp gauges are also available for 16mm–20mm and 25mm–32mm to verify crimp quality on site. See our EPS PEX crimp tools range for full details.
Frequently Asked Questions
What is EPS PEX crimp pipe?
EPS PEX crimp pipe is a crosslinked polyethylene (PE-Xb) pipe system manufactured by Elson, used for hot and cold water, rainwater, recycled water, and gas installations. The pipe is joined using brass crimp fittings and a dedicated crimping tool, creating a reliable, low-maintenance connection suited to trade plumbing installations.
What sizes does EPS PEX crimp pipe come in?
The EPS crimp pipe range is available in 16mm, 20mm, 25mm, and 32mm nominal sizes, with coil lengths of 25m, 50m, or 100m depending on the pipe diameter and type.
How do I identify which EPS pipe colour to use?
EPS PE-Xb crimp pipe is colour-coded by application: black for cold water, red for hot water, green for rainwater, and lilac for recycled water. Gas installations use the silver/natural multi-layer PEX/AL pipe. Always follow AS/NZS colour coding requirements for your state and application.
Are EPS crimp fittings suitable for gas?
Yes. The EPS crimp fittings range is rated for both water and gas applications. Gas installations must use the multi-layer PEX/AL gas pipe and must be carried out by a licensed gas fitter in accordance with Australian Standards.
Can EPS fittings connect to existing copper or polybutylene systems?
Yes. The EPS range includes copper press adaptors (water and gas) for transitioning to copper press systems, copper compression union flared fittings, and a comprehensive conversion adaptor range for connecting to existing polybutylene and various SDR-rated PEX pipe systems.
What crimping tool do I need for EPS PEX fittings?
EPS PEX crimp fittings require either the Elson ALBA manual crimping tool or the Novopress ACO153 12V battery press tool with EPS-specific jaws. The correct jaw size must match the pipe diameter being crimped. A crimp gauge should be used to verify each connection.
Related Categories
- PEX Crimp — Full PEX crimp pipe and fittings range
- PEX Pull On — Pull-on connection PEX system
- Copper products — Copper pipe, fittings and press systems
- Valves — Isolation and control valves for PEX systems
- Clips & Pipe Support — Pipe clips and brackets for PEX installations
Order EPS PEX Pipe and Fittings Online
PlumbingSales.com.au stocks the complete Elson EPS PEX crimp pipe and fittings range, ready to ship from our Melbourne warehouse. With over 60 years of industry experience and a 4.9-star rating from more than 7,200 verified customer reviews, we're a trusted supplier for licensed plumbers and trade professionals across Australia.
Free shipping on orders over $300 to most areas Australia-wide. Same or next day dispatch on stock items. Click & collect available from 23-25 Marni Street, Dandenong South, Melbourne.
Need help confirming compatibility or selecting the right fittings for your job? Call our experienced team on 1800 341 972 or email [email protected].