250Mj-Hr Single Cylinder LP Gas Regulator Kit Manual Bromic 6060526 incorporate a patented safety shut off device. This mechanism will engage in the event of gas flow greater than 140% of rated flow (e.g., in the case of regulator diaphragm failure or equipment leakage downstream), offering further peace of mind.
250Mj-Hr Single Cylinder LP Gas Regulator Kit Manual Change Over Bromic 6060526
$129.00
Excl. GST:
$117.27
Excl. GST:
Code : 503502
LPG gas enters the regulator through a pigtail from a gas cylinder. The gas enters the regulator at a pressure of about 700kPa to 1300kPa from a 45kg cylinder. The actual pressure depends on the ambient temperature, how full the cylinder is and the volume of the gas cylinder. The first stage of the regulator reduces the pressure to about 70kPa (no matter what the entering pressure was) and then the second stage reduces the temperature again to a nominal 2.75kPa.
For use with LP Gas (Propane)
Inlet Connection: 1/4" NPT
Outlet Connection: 3/8" NPT
Capacity (LPG at 2.8kPa) (MJ/hr / kg/hr) 250/5
Includes Adaptor + Bracket + Screws
Pigtail Copper: 1 x 450mm
Manual Changeover
Used for domestic, light commercial and transport applications
For use with LP Gas (Propane)
Inlet Connection: 1/4" NPT
Outlet Connection: 3/8" NPT
Capacity (LPG at 2.8kPa) (MJ/hr / kg/hr) 250/5
Includes Adaptor + Bracket + Screws
Pigtail Copper: 1 x 450mm
Manual Changeover
Used for domestic, light commercial and transport applications
Details
250Mj-Hr Single Cylinder LP Gas Regulator Kit Manual Bromic 6060526 incorporate a patented safety shut off device. This mechanism will engage in the event of gas flow greater than 140% of rated flow (e.g., in the case of regulator diaphragm failure or equipment leakage downstream), offering further peace of mind.
Free Shipping
Most Area's Over $300
- SKU
- 503502