250Mj-Hr Dual Cylinder LP Gas Regulator Kit Manual Change Over Stainless Pigtail Bromic 6060594

LPG gas enters the regulator through a pigtail from a gas cylinder. The gas enters the regulator at a pressure of about 700kPa to 1300kPa from a 45kg cylinder. The actual pressure depends on the ambient temperature, how full the cylinder is and the volume of the gas cylinder. The first stage of the regulator reduces the pressure to about 70kPa (no matter what the entering pressure was) and then the second stage reduces again to a nominal 2.75kPa.

For use with LP Gas (Propane)
Inlet Connection: 7/16" NPT
Outlet Connection: 3/8" NPT
Capacity (LPG at 2.8kPa) (MJ/hr / kg/hr) 250/5
Includes Adaptor + Bracket + Screws
Changeover: Manual
Pigtail Flexible Stainless Steel: 2 x 450mm
Used for domestic, light commercial and transport applications