Made in France to the highest standards, must be installed by a licensed plumber. EN 12050-3 and WaterMark approved
Pump performs dual functions by sucking water from the shower and pumping it away to be connected to an existing sewer line
Suitable for tiled floor installations
Suits walk in showers & low level shower trays
Ideal for high flow applications
Pump and waste inlet can be up to 3m apart horizontally
Dual function - sucks waste up from the gully and pumps waste water away up to 3m vertically or 30m horizontally or a lesser combination of both.
Pump can be sited up to 300mm above the gully
Wireless activation
For moulded shower tray installations refer to model Sanifloor 3 SA114
30 litre minute flow rate compatible with high flow showers
Suction line, Square floor grate and fixing materials provided
Recommended Discharge Pipe Diameter 25mm PVC Pressure Pipe
Normal Operating Temperature 35˚C
Electrical Power Supply 220-240V / 50Hz
Motor Power Rating 400W
Dimensions 295mm W x 191mm H x 164mm D
Warranty 2 years
Refer DOWNLOAD below for Technical information and specifications
Saniflo Sanifloor 1 SA113 grey water shower floor waste pump is designed specifically where floor drainage is required but where space underneath is very limited e.g. wet rooms. This two part kit with a powerful shower waste pump and can pump up to 3m vertically as well as 30m horizontally.
