Plastec K Valve Standard Inspection & Test Opening 100mm DWV 20945

Easy to use Revolutionary Inspection Test Opening, never lose the plug down the drain.
Accelerated testing time is reduced by more than 90%.
Reduced lost time injuries Safer testing systems.
Engineered test plug for water and air testing.
AS/NZ approved Watermark Standard.
Suits 100mm PVC DWV Pipe.
Available in Standard or Expansion Form

How It Works
1. Install the K-Valve into the required position and insert the K-Valve 100mm Test Plug and Test Cap.
2. The K-Valve 100mm Plug in the test position holding water at a static pressure.
3. The K-Valve 100mm Plug relieves the water test through the quarter turn relief valve.
4. Once testing phase is complete, remove the Test Cap and the K Valve 100mm Test Plug.
5. Install the insert piece and Permanent Cap.