Stiebel Eltron DHE27 AU Electric Instantaneous Water Heater 29.1kW 3 Phase
Stiebel Eltron DEL18 Plus AU Electric Instantaneous Water Heater 50C 19.4kW 3 Phase
Stiebel Eltron DEL13 Plus AU Electric Instantaneous Water Heater 50C 14.5kW 3 Phase
DEL Plus is suitable for supplying hot water to several draw-off points (single and group supply), e.g. simultaneous supply to bathroom and kitchen. Sealed unvented, pressure-tested appliance for use with all commercially available pressure taps. The DEL Plus water heater requires no safe tray, flue or ventilation.
Ideal Installation Areas, Bathrooms, Apartments, Commercial bathrooms or sinks, Kitchenettes
Maximum hot water output temperature 50° Celsius, no tempering valve needed
Electronically controlled continuous flow hot water delivery with 3i Technology
Temperature memory function keys
Temperature limiting function for childproofing (anti-scalding protection)
Rated output (415V) 14.5kW. Rated current (415V) 20.2Amp
Temperature adjustment 30-50°C
Dimensions H 466mm x W 225mm x D 116mm
Made in Germany. WaterMark Lic No. WMKA00301, AS3498
CALCULATING OUTPUT WATER TEMPERATURE:
Add below temperature rise value to Seasonal Average incoming cold-water temperature to calculate output at a desired flow rate. Typical Basin or Sink Tap Flow Rate is 6 Lpm and a Shower 9 Lpm
DEL13 Plus AU TEMPERATURE RISE (415 V) Litres Per Minute
6 L/min +34°C. 8 L/min +26°C. 10 L/min +21°C. 12 L/min +17°C. 14 L/min +15°C
SEASONAL AVERAGE INCOMING COLD-WATER TEMPERATURES:
Melbourne: 15°C. Sydney/Brisbane/Perth/Adelaide: 18°C. Canberra/Hobart: 14°C. Townsville/Darwin: 25°C
Refer Download for Further Information & Water Temperature Output Calculations and Flow rates
5 Year full parts and labour domestic warranty*
*Conditions apply - refer Stiebel Eltron warranty policy for full details.
Must be installed by a qualified licensed person in accordance with manufacturer’s instructions and all relevant plumbing and electrical regulations.