This appliance delivers water at an electronically controlled set temperature without having to overcome long supply lines with resulting line losses. Consequently, the DEM 6 is ideally suited to washbasins in commercial bathrooms, where a constant outlet temperature is preferred. Sensor taps provide the best solution to hygiene as your hands do not need to come into contact with the tap. This is particularly important in shared bathrooms, where users are exposed to germs from other users.

Electronically controlled mini instantaneous water heater with 5.7 kW output
Delivers a maximum of 50°C hot water in accordance with AS3498
No standby or distribution losses
Undersink installation, Hardwired single phase connection
Bundled with automatic sensor tap
Dimensions H 143mm x W 190mm x D 82mm
WaterMark Lic No. WMKA20371, Made in Germany

CALCULATING OUTPUT WATER TEMPERATURE:
Add below temperature rise value to Seasonal Average incoming cold-water temperature to calculate output at a desired flow rate.

TEMPERATURE RISE (240 V) Litres Per Minute
2.5 Lpm +35°C. 3 Lpm +29°C. 4 Lpm +22°C. 5 Lpm +17°C. 6 Lpm +14°C

SEASONAL AVERAGE INCOMING COLD-WATER TEMPERATURES:
Melbourne: 15°C. Sydney/Brisbane/Perth/Adelaide: 18°C. Canberra/Hobart: 14°C. Townsville/Darwin: 25°C

Refer Download for Further Information & Water Temperature Output Calculations and Flow rates
5 Year full parts and labour domestic warranty*
*Conditions apply - refer Stiebel Eltron warranty policy for full details.
Must be installed by a qualified licensed person in accordance with manufacturer’s instructions and all relevant plumbing and electrical regulations.