Rinnai Continuous Flow hot water systems are the most technologically advanced hot water system available today. These units are designed to be energy efficient, by heating water as it passes through the unit, therefore reducing running costs and greenhouse gas emissions, add to this its compact size which allows it to be installed almost anywhere.
Sleek, compact, quality Japanese design and manufactured in Rinnai’s own high-tech facility.
Low flow shower head (WELS) compatible
Puretemp temperature stability technology provides PCB controlled and perfectly stable outlet water temperature.
Bathrooms (Cool Climate / Warm Climate): 1 to 3
Installation: External
Gas Type: NATURAL GAS (Propane Gas Models Available)
Gas Energy Rating: 6+ star efficiency
Heating Capacity (raised at 25ºC): 26 L/Min
Height 531mm Width 351mm Depth 195mm
Gas Input (High): 199MJ/h
Cold Water Connection 20mm 3/4”
Hot Water Connection 20mm 3/4”
Gas Connection 20mm 3/4”
Factory Pre-set Temperature 50C (60C Models Available)
1.5L/minute minimum operating flow rate.
Colour: Dune
Direct electronic ignition with automatic flame sensing
Electrical Supply AC 240V 50 Hz (10-amp weatherproof power point)
Up to 4 Water Controllers can be installed
Preset 50°C Appliances – This is where the unit is factory set to 50°C and the entire house is supplied at this temperature. This is adequate in most domestic situations, but any temperature losses in the pipe work due to poor or old insulation can result in lower temperatures being delivered at the outlet.
Rinnai National Warranty & After Sales Support
Rinnai provides a standard 3-year (10 Year Heat Exchanger) parts and labour warranty on all Builders series Continuous Flow hot water systems plus an optional 5 years extended Heat Exchanger warranty. Parts and Labour Warranty 3 Years (5 Years if two or more Water Controllers are installed in domestic applications)
Rinnai B26 NATURAL GAS 50°C B26N50A Builders Continuous Flow Hot Water Heater are the most technologically advanced hot water system available today. These units are designed to be energy efficient, by heating water as it passes through the unit, therefore reducing running costs and greenhouse gas emissions, add to this its compact size which allows it to be installed almost anywhere.
