Rust preventive coating, single component and really easy to apply. The coating forms a rubbery anti-rust membrane which is impermeable to water and highly resistant to weathering, mechanical and chemical attack. Can be applied Iron, Steel, Special Alloys, Copper, Lead, Zinc, Galvanised & Metalised Iron & Steel, Aluminium, Concrete, Fibro Cement.
Direct to rust application.
Contains powerful rust inhibitors.
Ideal for long term protection of roofs and gutters.
Incredible adhesion. Impermeable to water. Low odour.
200% elastic. wont crack or peel.
Safe for potable water - run off only.
Minimal surface preparation required.
No primer required - tools wash up in water.
Coatings do not stick to silicone.
Can be painted using acrylic based paint
Recommended Coverage: 5kg = 6m2 to achieve total 350 microns dry film thinkness in 2 coats.
20Kg Noxyde Anti-Rust Waterproofing Membrane Gravel Grey RAL 7001-20 is a rust preventive coating, single component and really easy to apply. The coating forms a rubbery anti-rust membrane which is impermeable to water and highly resistant to weathering, mechanical and chemical attack.
Elasticity: Noxyde has an excellent elasticity (>200%) for protection against cracking and peeling on metal surfaces to expansion, contraction, movement and mechanical impact. Ideal for cables, bolts and nuts, cladding, etc.
Adhesion: Even when the membrane is cut, its incredible adhesion will prevent any type of undercutting by corrosion and therefore corrosion is not able to spread.
Waterproofing: Noxyde is impermeable for water. This strength and its excellent elasticity make Noxyde the best solution for the protection and waterproofing of cladding and metal roofs.
Excellent edge coverage: Corrosion usually begins on outside edges where there is minimal film build. Testing proofs a 100% edge coverage at a round corner and still a 41% coverage at a 90 degree corner.
