Cold Water supply temperature: 5°C – 25°C
Hot Water supply temperature: 65°C – 99°C
Adjustable outlet temperature: 40°C – 50°C
Factory set temperature: 50°C normal (must be commissioned onsite by installer)
Designed for solar applications and instantaneous heaters
Maximum hot water supply temperature 99°C
Fast response to pressure fluctuations
Forged DR brass body
Advanced polymers for greater resistance to calcium deposits
Integral 60 mesh stainless steel line strainers
Integral non return valves
Stainless steel springs
O-ring seal union connectors
Tamper proof adjustment Special adjusting tool supplied
Seasonal adjustments not required
WaterMark Certification – License No. 20137
Must be installed by a licensed plumber and in accordance with AS/NZS3500 National Plumbing and Drainage Code
AVG 15mm 1/2" High Performance Tempering Valve Orange Cap TVA15CHP-i designed for solar and instantaneous hot water system installations and provide optimum performance when installed with hot and cold water supplies of equal dynamic pressure, i.e. with the water flowing. It is recommended that the hot and cold water supplies to each tempering valve be controlled via their own pressure control valve. In most domestic installations it should be possible to fit one control valve at the property boundary to control pressure to the whole site. For commercial installation it is recommended to fit a pressure control valve on each inlet to the tempering valve. The Tempering Valve must be installed by a licensed plumber and in accordance with AS/NZS3500 National Plumbing and Drainage Code, relevant local government requirements
