Facebook Pixel
AVG 20mm 3/4

AVG 20mm 3/4" Standard Tempering Valve Yellow Cap Copper Olive TVA20C-i

Please select a wishlist
AVG 15mm 1/2

AVG 15mm 1/2" Standard Tempering Valve Yellow Cap Copper Olive TVA15C-i

25mm Tempering Valve Hi Flo AVG TVA25HF

AVG 25mm 1" Tempering Valve Hi Flo Copper Olive TVA25-HF

AVG 20mm 3/4" Standard Tempering Valve Yellow Cap Copper Olive TVA20C-i

$84.50
Availability: In stock
CODE:
67776
Show prices
INCL
EXCL
GST
CODE : 67776
  • Buy 5 for $76.02
    Each and Save $8.48 $7.71 (Per Unit)
Cold Water supply temperature: 5°C – 25°C
Hot Water supply temperature: 65°C – 85°C
Adjustable outlet temperature: 40°C – 50°C
Factory set temperature: 50°C normal (must be commissioned onsite by installer)
Fast response to pressure fluctuations
Forged DR bronze body
Advanced polymer components for greater resistance to calcium deposits
Integral 60 mesh stainless steel line strainers
Integral non return valves
Stainless steel springs
O-ring seal inlet union connectors complete with nuts and olives
Tamper proof adjustment
Special adjusting tool supplied moulded into valve cap
Seasonal adjustments not required
Water Mark Certification – License No. 20137
Must be installed by a licensed plumber and in accordance with AS/NZS3500 National Plumbing and Drainage Code
AVG 20mm 3/4" Standard Tempering Valve Yellow Cap Copper Olive TVA20C-i provide optimum performance when installed with hot and cold water supplies of equal dynamic pressure, i.e. with the water flowing. It is recommended that the hot and cold water supplies to each tempering valve be controlled via their own pressure control valve. In most domestic installations it should be possible to fit one control valve at the property boundary to control pressure to the whole site. For commercial installation it is recommended to fit a pressure control valve on each inlet to the tempering valve. The Tempering Valve must be installed by a licensed plumber and in accordance with AS/NZS3500 National Plumbing and Drainage Code, relevant local government requirements