The MHR 1" series is a fully Automatic Hydraulic Rain Mains water changeover device designed for pressure pump supply systems in harvesting rainwater for the toilet, laundry and household applications with automatic mains backup. MHR 25mm valve is designed to operate with an electronic pressure controller with auto-restart not requiring a float switch. MHR valve comes with 25mm 1” outlet, which makes the system ideal for domestic and commercial applications simple to install.
Application: Domestic, Irrigation and Commercial Installations
CONSTRUCTION: HSM1100-PC Submersible Pump
Power (kW) 1.1. (HP) 1.5. Head (M) 56. Flow (Lpm) 98.
Pump casing: Stainless steel AISI 304. Motor shaft: Stainless steel AISI 304. Impellers: Techno polymer.
Double mechanical seal: silicon carbide graphite / ceramic graphite
Motor IP68. Cooled motor (by water) of Class F and thermal protection
Electric power cable HO7RN 5m with 3 pin. 240V
Dimensions: 800mm H x 100mm D. 25mm 1" BSP Female Outlet
VALVE SPECIFICATIONS
Max mains pressure 1050 Kpa. Max pump pressure 1050 Kpa. Flow rate >200 LPM. Max Water Temperature 50C
Full flow 1” Dual Outlets. Rainwater Inlet 25mm 1” BSP Female. Mains Water in 25mm 1” BSP Female. Outlets 25mm 1” BSP Female
Does not require regular maintenance. No electrical consumption - No electronic components
Solid brass construction - Fully weatherproof - Built to last.
Can be mounted in any position. No in-tank float required
Mains pressure not limited. Certified dual check valve for backflow prevention
Certified to: WaterMark ATS 5200.477 WMK 60075 Complies with AS/NZS 3500.1 when installed by a licensed plumber.
Note: Should the static mains supply be greater than 400 kPa above the supply pressure of the pump the device will not completely isolate mains water.
Maxijet MHRS2 Hyjet Rain Mains System 25mm With HSM1100-PC Submersible Pump 98Lpm is designed for home supply systems in harvesting rainwater for the toilet, laundry and household applications with automatic mains backup
