Puretec IRX2000 Iron & Odour Removal Water Treatment System 20-70 LPM
Puretec IRX4000 Iron & Odour Removal Water Treatment System 40-90 LPM
Puretec IRX3000 Iron & Odour Removal Water Treatment System 30-80 LPM
Puretec IRX3000 are advanced catalytic iron removal systems, designed specifically for applications where both iron and sediment are present. Iron is usually the cause of the notorious orange-brown staining often seen on fences and buildings, and indoors in wet areas such as toilet bowls. In addition to staining, at higher levels it causes corrosion and damage to valves and fixtures. Unlike traditional iron removal systems, the IRX Series is also suitable where low levels of Hydrogen Sulphide are present - one of the most common causes of bad odour in ground water.
Designed to reduce staining & deposits from iron, manganese and sediment.
Prevent the staining and rust build up in your water system.
Automatic backwash – set and forget.
Stores system configuration and operation data in non-volatile memory.
Weather resistant cover for controller.
pH Range 6.5 - 9
Flow Rate 30 Lpm
Maximum Flow Rate 80 Lpm
Connection 1” Male BSPT, 1” Drain
Min/Max Pressure 250 - 690 kPa
Operating Temperature 5 - 45°C (41 - 113°F)
Refer download for specifications